DESCRIPTION
Gas pressure regulator RDM 80/200-К04 is used in gas supply systems and is designed to reduce high gas pressure to a set average value, as well as for automatic maintenance of output pressure within set parameters irrespective of input pressure differential and consumption, for stopping automatic gas supply when input pressure rises to an emergency level over acceptable set paraments.
Use permit No. РРС 00-24987. Compliance certificate No. РОСС RU.МЕ55.В01646.
The following designs of the regulator are manufactured:
- RDM 80/200-К04 with valve RDM 80/200-01 000,
-
RDM 80/200-К04-01 of the designs from 01…07 with valve RDM 80/200-02 000.
TECHNICAL SPECIFICATION
-
Input pressure, mPa (kp/cm2)
8 (80)
-
Output pressure, mpa (kp/cm2)
Array
-
Weight (including counter flange), kg
121
-
Body material
Steel
-
Minimal pressure differential, mPa (kp/cm2)
0,15 (1,5)
-
Relative humidity, %
90
-
Total service life, not less than
12 years
-
Сonnection
Flange connection pursuant to GOST standard No. 12821-80
-
Power fluid passage in a valve, cm3/min, not more than
1
-
Operational temperature, °С
от –40 до +60
-
Accuracy of output pressure maintenance, not more than 10%,%, and not more than — when the valve is fully closed
± 10
-
Accuracy of output pressure maintenance, not more than 10%,%, and not more than — when consumption is from 3 to 100%
± 2,5
Output pressure, mpa (kp/cm2)
-
|
Conventional marking (code)
|
Рoutout, mPa (kp/cm2)
|
N-mm
|
|
RDM 80/200-К04
|
0,3...1,2 (3...12)
|
425
|
|
RDM 80/200-К04-01
|
0,3...1,2 (3...12)
|
425
|
|
RDM-С-3-80/200-80/0,5...1
|
0,05...0.1 (0.5...1)
|
431,5
|
|
RDM-С-3-80/200-80/1...3
|
0,1...0,3 (1...3)
|
431,5
|
|
RDM-С-3-80/200-80/3...6
|
0,3...0,6 (3...6)
|
431,5
|
|
RDM-С-3-80/200-80/6...12
|
0,6...1,2 (6...12)
|
425
|
|
RDM-С-3-80/200-80/12...20
|
1,2...2 (12...20)
|
425
|
|
RDM-С-3-80/200-80/20...40
|
2...4 (20...40)
|
425
|
Marking example of regulator when ordering or in other documents where it may be applied:
- Gas pressure regulator RDM 80/200-К04-01
Specification No. ТУ 3742-017-12317765-97,
- Gas pressure regulator RDM-С-3-80/200-80/0,5…1
Specification No. TS 3742-017-12317765-97, where there is К04, the regulator is trimmed with a safety device.
01 is a regulator device (with valve RDM 80/200-02 000),
С is a body material (steel),
3 is designed with a safety device,
80 is an input nominal inside diameter,
200 is an output nominal inside diameter,
80 is maximum input pressure, kp/cm2.
