Gas-regulating and pumping equipment

SPIRAL CASING (SCREW) PUMP ASSEMBLY UODN 200-150-125

Request a consultation
SPIRAL CASING (SCREW) PUMP ASSEMBLY UODN 200-150-125

DESCRIPTION

Russian National product classification code 36 3190, Specification No. TS 3631-099-07552487-03

It is used for pumping the following:
 - light (gasoline, diesel fuel) and dark (oils, fuel oil residue) oil products,
 - viscous mud oil residue from tanks, cisterns, tankers, storages.

Main advantages:
 - pumping of high viscous fluids up to 500 centistoke and high gas content fluids. Till the present day, it was possible only with the use of piston pumps.
 - pumping of fluids with high content of large hard particles (up to 10 mm).
 - a special design for corroding medium.

The main feature of spiral casing (screw) pump assemblies is that screw wheels are used in them. The wheels have special screw blades with constant or variable pitch. It gives us an inter-blade channel that enables low hydrodynamical load of blades and high anti-cavitation and power characteristics.

Spiral casing screw pumps are a pump option adapted from outer space engineering.

TECHNICAL SPECIFICATION

  • Suction head, m 8
  • Dimensions, mm 1243x481x650
  • Weight, kg 355
  • Engine power, kW 30
  • Pump pressure, m 52...28
  • Power Three-phase alternating current
  • Capacity, m3/h 75...185
  • Temperature of pumped fluid, °С, not more than 90
  • Seal type Sleeve, frontal
  • Revolution rate, rpm 3000-80
  • Electric power engine AIMR180М2, ВА180М2U2,5, АIММ180М2U2,5
It is essential:
 - in emergencies for pumping viscous mud fluids.
 - for basic work at oil plants, service racks, in industrial wastewater systems.
 - when dealing with petroleum and oil product spills.
 - when pumping oil products from subsurface tanks.

All pump assemblies are designed with electric power explosion-proof (explosion protection grade is 1Ехd11ВUТ4) engines and U-climatic-category engines with nominal outside temperature not higher than 40°С and not lower than 40°С.

Conventional marking
UODN 130-100-75
200 is a rotor diameter, mm
150 is a nominal inside diameter of input flange, mm
125 is a nominal inside diameter of output flange, mm